ALITOVE LED Strip Lights Warm White Waterproof 32.8ft 1200 LEDs 2835 SMD 24V DC 3500K Outdoor LED Flexible Ribbon for Kitchen Bedroom Garden Under-cabinet Backyard Hallways(No Power Supply & Adhesive)
$25.99
Related Products
Product description
Parameter:
Light source: SMD 2835 Warm White LEDLED quantity: 120 LEDs/m, 10m 1200 LEDs in total Protection Rate: IP67 Waterproof (Can be used outdoor) Max Power: 24V DC, 70W per roll (0.08W per led; 9.6W per meter)Working temperature: -20℃ to 40℃Size: L1000cm (10M) x W1.0cm x T0.5cmPackage List: 1x 32.8ft ALITOVE Warm White LED strip (No power supply and dimmer, only LED strip)
Kindly Note:
The 24V LED strip comes without power supply. To let it work, please buy a 110V AC to DC 24V 4A 96W power supply. We recommend ALITOVE 24V 4A power. (ASIN: B0896Y8181)If the strip blinks or flashes, it means the power is not enough for the strip. The power for 10m led strip must be 24V 70W at least.The LED strip is flexible, but please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack.
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars 2
4.3 out of 5 stars 99
4.3 out of 5 stars 99
4.3 out of 5 stars 99
4.3 out of 5 stars 99
4.0 out of 5 stars 24
Price
— no data
— no data
$11.99$11.99
— no data
$11.99$11.99
— no data
Color
RGB Blue Pink Orange Purple White
Product Dimensions : 393 x 1 x 11 inches; 1.41 Pounds
Item model number : 10M2835WWWP
Date First Available : March 24, 2019
Manufacturer : Shenzhen ALITOVE Electronic Technology Co., Ltd
ASIN : B07PY2JB7J
Customer Reviews: 4.2 4.2 out of 5 stars (627) var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
【Energy-saving LED Strip】 Featuring cutting-edge technology that delivers full brightness while using only 70W of power.
【Super Quality】High brightness SMD 2835 LED, Warm White 3200K~3700K, 15lm/LED, color rendering index (CRI) more than 80, high-density 120 LEDs/M design makes luminescence more even and natural.
【Super Long Design】 Designed with 10m continuous length and 24V DC input. Even if all the 1200LEDs are turned on full white, no voltage drop. Pretty suitable for indoor and outdoor lighting decoration projects that need long LED strip.
【Safe to Use】 New generation 24V LED strip, much brighter than old 12V LED strip and much safer than 110V LED strip. Touchable to children.To let it work, you need a 24V DC Power supply, which is not included.
【Waterproof IP67】 The LED strip is put in clear PVC tube, which protects it very well from water & dust and makes it easy to clean. It will work well outdoor, even in extreme weather such as rainstorms.
【Cut and Bend Freely】 It can be cut off between every 6 LED without damaging the rest strip. Soft and flexible. You can cut it to any length and bend it to any shape to meet your requirements.
10 reviews for ALITOVE LED Strip Lights Warm White Waterproof 32.8ft 1200 LEDs 2835 SMD 24V DC 3500K Outdoor LED Flexible Ribbon for Kitchen Bedroom Garden Under-cabinet Backyard Hallways(No Power Supply & Adhesive)
Add a review
$25.99
Frank –
Woah bright… Like really woah.
UPDATED: 1/30/2023Initial review: I understood these would be bright. But my goodness. I installed them in the eaves of my house to give the whole house some indirect lighting. It looks fantastic!I used Meanwell 120v to 24v pwm power supplies to drive the string. (Knowing they’d be bright, I wanted to dim them to an appropriate level.) So a potentiometer can control the power supply and I dimmed them down to about 30%. I’m not joking when I say they are bright.The picture shows the first strip up and dimmed to an appropriate level. Notice how you can’t see any lights but the whole house is gently glowing 🙂 The exact effect I wanted.I’ll try to remember to put a picture up of the whole house when I’m done.With wiring, drivers, enclosure boxes, pots etc. I’m clocking in at ~$2.95 a foot for all materials and everything installed. If I we’re to of it again, you could try halving how many drivers you have and run 2 strings per driver. But I like knowing I can kick up the brightness if I ever feel like it or the leds are dimming with age.UPDATE: 1/30/2022They are still running great. I’m not sure what else to say other than I hope the quality of the product they are still releasing is just as good as the one I got. They work well in Texas summers and the bottom of Texas winters (which is admittedly not that much, but hey, it can freeze.)UPDATE: 1/30/2023I have bought more and used them all over my house. I used them in various ways to create various indirect lighting effects. They are bright enough that even in an indirect capacity, they emit more than enough light. I like the hiding behind crown molding version. But my favorite is the light rod running across the bathroom.Don’t forget quality tape. The best I’ve found is the gray foamy tape with a red backing. Works indoors and outdoors. Needs to be installed in Temps that stay warm for 24 hours to let the tape set though.
Gus –
I’d Buy Again
These have been a good product straight out of the box or somewhat customize…shortening and soldering strips to run around tight corners.
James Cubic –
Decent color, modest voltage/brightness drop
I’ve had these installed in my living room around the perimeter of the ceiling now for a few weeks. They have have a good and consistent warm color without being yellow. The high density of LEDs make for a pretty decent look.I think the outer plastic jacket will help keep the dust away (which has made it difficult to clean other non-jacketed LED strips). The only downside for the jacket is that I expect there isn’t very good thermal dissipation so I don’t want to run them at full power. They’re plenty bright for my needs at a lower voltage so this was a good trade off.In my application I needed to use the full 10m length and I had hoped the 24V strips would have minimal voltage drop. Unfortunately, there is a pretty significant voltage drop especially at full power. I’m running the strips at 19.3V to limit dissipation and minimize the voltage loss and even so, the voltage at the end of the strip is 16.5V. One can easily see the difference in brightness between the start and end of the strip as shown in the attached picture. I also used a light meter which showed approximately 50% brightness at the end of the strip compared to the start. Thankfully in my application decrease in brightness is gradual enough over a the ceiling that the room doesn’t seem unevenly lit. I only notice it when I look a the strips directly. I would suggest to anyone considering to use the full length of this strip to add supply wires to both ends of the strip.As some other reviews have pointed out, the wires attached to the strip were very underrated and with far too thin conductors. At full power the strip draws about 5A so to avoid additional voltage drop it’s important to have appropriately sized wires. I just removed the factory leads anyway when I was installing so this is an easily solvable issue.Installing the adhesive tape on the strip was a little finicky to keep well aligned. I bought the adhesive recommended by the seller (B07QGZCZ2K) which worked well but in retrospect it would have been much easier if the adhesive was already present. I had a few oops where the tape poke out which looks a little unkempt up close since the tape I bought is black and the surface I install these on is white. Not a ding against these lights since the listing was clear about what I was getting but I think it might be useful to others considering this.
Minal Patel –
Bright enough !!
Good for the price !! It achieves the goal
Charles –
Work great, bright, no complaints at all!
I installed these on 110′ of deck railing then again on a hot tub privacy wall. Total 8 rolls. Originally I looked up LED strips, wattage, etc. For some reason I thought 1 300w would run the deck railing and not even be at the 80% capacity. After testing on the privacy wall (4 full strips) the 300w converter was hot. I did some closer checking on these specific ones and realized you’re looking at approx 120w per roll (4 rolls = 480w) Nobody sells a 600w that I could find so I had to re-wire and run a total of 4 300w converters. They work perfect after updating the wiring and adding the dimmer. They’re bright enough you can see them during the day but at night they’re actually so bright you need to be able to turn them down. FYI I used 4 of these to run them https://www.amazon.com/UL-Listed-Dimmable-Transformer-Waterproof-Outdoor/dp/B07PWPVDYL
Kris –
I took this item for a kitchen home project. I already have Ikea LEDs below the cabinet but I found them too faint, I need more lights. So when I saw this item and the density of LED’s I decided to pick them up.I measured the distance between LEDs and they are about 6 mm, which is really amazing. This will also help with providing more consistent light, rather than spotty like with typical LEDs.One of the key factors is warm white. My wife just can’t stand anything that resembles “laboratory” cold white and these LEDs look fine. I’m not an expert in perfect ratio of RGB but visually these look ok for our purpose.Lights are super bright. Not sure if the picture will depict this properly but I was surprised how bright they are – probably because they’re very dense.Total length of 10m will be sufficient to cut them and do another half for the countertop.I particularly liked that they left two wires so you can concatenate strips if you need to buy one more roll.As all LED’s these are also concatenated by a soldering process to make a full length. No major concerns here but I noticed some small bubbles on the strip as part of this manufacturing process.Overall these are pretty good LED’s but a little bit on the pricey side (29.99$ at time of writing) given that there is no power supply, so you’ll need to get one separately.
Aussie –
Great service
Igor Selezniov –
Happy with it. Bright light, good money value.
Mike Fedoruk –
The LED strip lights work perfectly for what I wanted them to do. Nice bright light.
Ian –
These feel like high quality led strips. The PCB is thick and sturdy and they are very bright.The adhesive holds up well for my use. I have them in aluminum channels with diffusers, not directly attached. Excellent under cabinet and accent lighting.